Generator Remote Start / Stop Switch for petrol or diesel electric start generators

save 23%

Details

SKU Remote start switch

RRP (exc. VAT): £129.00

Our price (Ex.VAT): £99.00

Quantity

Ask a question about this product

Description
Send to friend

Generator Remote Start / Stop Switch for petrol or diesel electric start generators

DESCRIPTION

This switch is ideal for use if the generator needs to be started from inside a bulding fo example. It can be installed together wil a low fuel cut off sensor to provide a reliable remote start generator set-up.

Suitable for All Evopower Diesel generators.

This is an Automatic Engine Control Module designed to automatically start and stop the engine. It will indicate the operational status and fault conditions, automatically shut down the engine and indicate the start engine failure by a flashing LED on the front panel. Other simultaneous faults are indicated by steady LED.

Start relay

0.5 second after the fuel relay is energized, the 3 attempt start will begin its start sequence: the start relay will energize, feeding battery +ve (on terminal 6) to terminal 7 and thence on to the starter circuit. The crank period is set for 12 seconds.If the engine has not fired by the end of 1st attempt, the starter is turned off for a 20 sec. period. The sequence will then repeat up to a maximum number of start attempts.

Following a successful start, sensed when AC alternator's voltage rises above 40% of nominal, the crank relay is de-energized and latched out to prevent reengagement of the starter with the engine running.

Should the engine still fail to start after the maximum number of attempts, FAIL TO START is displayed and the starter is latched out until reset via stop position of (rocker switch, selector switch, key switch where applicable).

Operation of the module is via (rocker switch, selector switch, key switch) mounted on the front panel with START and STOP positions or via remote start terminal 1.

Relay outputs are provided for:

Fuel Solenoid Output
Start Output
DC alternator excitation

The relays supply positive plant supply out.

Configurable inputs are available for:

Low Oil Pressure.
High Engine Temperature.
Remote Start.
Speed sensor on/off.
AC alternator monitor.
Spare alarm input (N/C) to give protection expansion. This allows the module to function with N/O or N/C switches.